Build the acoustical sealant scope review record
Start with partition types, wall sections, reflected ceiling plans, details, and acoustic notes. List the wall types that require sealant and identify whether the condition occurs at floors, decks, columns, exterior walls, openings, or penetrations. Do not apply one perimeter rule to every partition.
Use the interior partition takeoff review as a related control. Keep this review tied to its own source population and cost lines.
Check quantities and scope boundaries
Measure each documented interface by side and layer where the assembly requires separate beads. Record backing, cleaning, access above ceilings, and work around services without converting a design gap into an assumed product system.
AACE recommended practices provide general estimating references. The controlled project documents and approved estimate basis govern this review.
| Review field | Required record |
|---|---|
| Population | Location, type, and source |
| Quantity | Measured basis and unit |
| Interface | Included work and package owner |
| Disposition | Estimate treatment and reviewer |
Reconcile the package before release
Compare the sealant record with partition lengths, head conditions, rated barriers, and MEP penetrations. Assign perimeter work, penetration treatment, and final patching so acoustical sealant is not omitted or duplicated with firestopping and general joint sealant. Record unresolved assignments in the firestopping penetration takeoff review and preserve the approved disposition with the estimate revision.
